lift conveyor belt

wide range materials can be handled, 1.less space requirement, 2.no transfer point, 3.low maintenance 4 .big capacity

1,The requirements of the baseband:

Corrugated sidewall conveyor belt requires a certain degree of tensile strength and wear resistance. Such as the corrugated sidewall conveyor belt of the remaining empty side, its tape vertical request soft and horizontal requires a certain rigidity in order to meet the requirements of the angle bend. Corrugated sidewall conveyor belt produced by using a special structure which is the lateral rigidity of the baseband, solved the large-sized conveyor belt occurred the phenomenon of collapse during the return trip. 

2,Base Belt Structure:

Four Parts: Top cover rubber,bottom cover rubber, Reinforced core,Cross rigid.

Thickness of top cover rubber:3-6 (mm)

Thickness of bottom cover rubber: 1.5-4.5 (mm).

Belt core: Nylon,EP,cotton or steel cord.

The width is the same as normal belt,The standard meets with GB/T7984 

3, Diaphragm

Cleat types:T,TS,C,TC and TCS

The cleat is made of enforced fabric,solid,anti-shock to avoid distortion.

“TS”and “TCS”cleats are normally used up to 40°,“TC”and “TCS”are normally used from 40°to 90°.

Sidewall,cleat and base belt are joined through hot vulcanization.

Cleats and sidewalls are joined through bolt to prevent leakage of material.

lift conveyor belt